Temperature Strips


Weight .01 lbs
Dimensions 7.25 × 12 × .5 in
Temperature Range

High Heat – Brew Heads, Low Heat – Steamers & Frothers

Temperature Accuracy

+/- 2°C

Brewing at the correct temperature, either with your brew water or with your milk is essential to optimizing your results.


Buy our High Heat Temperature Strip, with a range of 158 to 212°F / 70 to 100°C to ensure that your brew head is preheated prior to adding your brew water.


Similarly, buy a Low-Heat Temperature Strip, with a range of 77 to 149 °F / 25 to 65 °C to ensure that the milk in your frother or steamer has reached the optimal point for latte art.


Take control of your brew and improve repeatability of your tasty shots by placing these easy to use, easy to read temperature strips on your brew heads and steamers!


Comes with one (1) customizable temperature strip. Dimensions are 2.25 x .5 inches.


*Prior to application, ensure surface is clean and dry. During application, ensure that strip lays flat across face of cylinder or other surface and that no gaps or air pockets are present where water could seep in between surface and strip


As the gauge warms to the response temperature, the window starts with a tan or reddish-brown and continues to change to green.
  • TAN window is above actual temperature reading
  • GREEN window is actual temperature reading
  • BLUE window is below actual temperature reading
  • Moisture Resistant: Self-Adhesive Backing
  • Estimated Shelf Life of Adhesive: 2 yrs, but will vary depending on application and use

Shipping Delay Until August 16th

Due to high demand, any Flair Espresso product bought between August 6th, 2021 and August 15th, 2021 will only begin shipping in the week starting Monday, August 16th. We apologize in advance for any inconvenience as we work to serve all our valued Flair-istas!

Please Note!

Shipping to an address that is different from your billing address may require additional verification.